Conveyor Bearing 45
In stock and ready to ship!
This product is already in quote request list
Product Description
| TECHN. DATA / ITEMS SUPPLIED |
TECHN. DATA / ITEMS SUPPLIED |
| – Cast aluminum, powder coated gray |
– Cast aluminum, powder coated gray |
| – Qty 1 Self aligning Ø 17 mm ball bearing sealed on both sides |
– Qty 1 Self aligning Ø 17 mm ball bearing sealed on both sides |
| – Qty 2, M8x16 socket head cap screws |
– Qty 2, M8x16 socket head cap screws |
| – Qty 2 M8 square nuts |
– Qty 2 M8 square nuts |
| – Qty 1 M6x25 hex head screw |
– Qty 1 M6x25 hex head screw |
| – Qty 2 gray plastic screw cover caps |
– Qty 2 gray plastic screw cover caps |
| – Available with stainless bearing and screws, Part # 21.0993/5 |
– Available with stainless bearing and screws, Part # 21.0993/5 |
| – Weight |
– .275 kg |
| APPLICATIONS |
APPLICATIONS |
| – Conveyor bearing for belt rollers with a Ø 17 mm Axles |
– Conveyor bearing for belt rollers with a Ø 17 mm Axles |
| – For use with Belt Driving Cylinder 45 for motor kit, Part # 29.5022 |
– For use with Belt Driving Cylinder 45 for motor kit, Part # 29.5022 |
| – For use with Belt Driving Cylinder 45 for plug on motor, Part # 29.5023 |
– For use with Belt Driving Cylinder 45 for plug on motor, Part # 29.5023 |
| – For use with Belt Driving Cylinder 45, Part # 21.0995 |
– For use with Belt Driving Cylinder 45, Part # 21.0995 |
| – For use with Belt Tensioning Cylinder, Part # 21.0994 |
– For use with Belt Tensioning Cylinder, Part # 21.0994 |
| ASSEMBLY |
ASSEMBLY |
| – No processing required. Simply bolt to t-slots using supplied M8x16 screws & M8 nuts |
– No processing required. Simply bolt to t-slots using supplied M8x16 screws & M8 nuts |
| – Use Conveyor Bearing 45 With Bore, Part # 21.0993/1 when drive shaft must extend thru bearing |
– Use Conveyor Bearing 45 With Bore, Part # 21.0993/1 when drive shaft must extend thru bearing |
| – Use tab on Swivel Plate, Part # 29.5001, as backstop for M6 jacking screw |
– Use tab on Swivel Plate, Part # 29.5001, as backstop for M6 jacking screw |
| – Alternatively use Multi-Block GD, Part # 21.1355, as backstop for jacking screw |
– Alternatively use Multi-Block GD, Part # 21.1355, as backstop for jacking screw |
| – Recommended locking torque for M8x16 screws is 25 Nm |
– Recommended locking torque for M8x16 screws is 25 Nm |
The MiniTec Power-Lock Fastener is Available at Central Industrial Solutions SKU: 21.1018
Exclusive Canadian Distributor for MiniTec Aluminum Framing
Product Quality Guaranteed
