28.9510TBP.375INSETSCREWL
28.9510TBP.375INSETSCREWM28.9510TBP.375INSETSCREWR

Timing Belt Pulley LR6 With 3/8″ Bore & Set Screw

Special Order

Product Description

TECHN. DATA / ITEMS SUPPLIED TECHN. DATA / ITEMS SUPPLIED
– Aluminum housing, Powder coated gray – Aluminum housing, Powder coated gray
– 16AT5 aluminum pulley, 36 teeth – 16AT5 aluminum pulley, 36 teeth
– Qty 2, Ball Bearings – Qty 2, Ball Bearings
– Qty 1, M5x5 Set Screw with thread lock – Qty 1, M5x5 Set Screw with thread lock
– Qty 4, M8x20 C’ sunk screws & M8 nuts – Qty 4, M8x20 C’ sunk screws & M8 nuts
– Bore Dia. – .375″ No key
– Re-borable to: – 14mm
– Travel (1 Rev) – 180mm
– Frictional moment at 1/1000 belt tensioning – .30 Nm
– Max load – 30 Nm
– Weight – .94 Kg.

APPLICATIONS
– Timing belt reverse unit for LR6 linear rail & slides & a motor with a Ø3/8" shaft with flat
– 3/8" shafts are most commonly found on Nema 23 & Nema 34 Motors
– Light & medium duty linear motion
-Additional machining to pulley housing and/or an adaptor plate are required to mount motor directly to pulley housing. Send motor print to sales@minitecframing.com for technical assistance.

ASSEMBLY ASSEMBLY
– Insert supplied M8 square nuts into rail – Insert supplied M8 square nuts into rail
– Feed timing belt thru pulley – Feed timing belt thru pulley
– Move pulley over rail & join supplied M8x20 C’ sunk screws with square nuts (Don’t tighten yet) – Move pulley over rail & join supplied M8x20 C’ sunk screws with square nuts (Don’t tighten yet)
– Fix timing belt on slide – Fix timing belt on slide
– Tension belt thru access holes in back See Picture – Tension belt thru access holes in back See Picture
– Tighten M8x20 C’ sunk screws – Tighten M8x20 C’ sunk screws
– Line up set screw in pulley with access hole in pulley housing – Line up set screw in pulley with access hole in pulley housing
-Insert motor shaft with flat facing set screw -Insert motor shaft with flat facing set screw
– Tighten set screw against shaft using a 2.5mm hex key – Tighten set screw against shaft using a 2.5mm hex key
– Belt length in reverse unit = 160mm – Belt length in reverse unit = 160mm
– Timing belt length = 2xRail Length + 260mm – Timing belt length = 2xRail Length + 260mm

++ 3D STEP

++ Inventor 2012

MiniTec Power Lock Demonstration

The MiniTec Power-Lock Fastener is Available at Central Industrial Solutions  SKU: 21.1018  

    Request a Quote For



    NEED TO CUSTOMIZE?

    SPEAK WITH AN EXPERT

    Custom Applications for Unique Needs

    From sketches to engineered drawings and plans, Central Industrial Solutions can help bring your vision from concept to creation.

    Contact Us